NTN 1205 Self-Aligning Ball Bearing - Straight Bore, 25 mm ID, 52 mm OD, 15 mm Width, Open

SKU: NTN 1205

$8.70

Frais d'expédition calculés lors du paiement

Disponible dès maintenant!

NTN 1205

Self-Aligning Ball Bearing - Straight Bore, 25 mm ID, 52 mm OD, 15 mm Width, Open, CN





SPECIFICATIONS

Bore Type Cylindrical
Bore Diameter 0.9843 in, 25.000 mm
Outside Diameter 52.000 mm, 2.0472 in
Overall Width 15.000 mm, 0.5906 in
Closure Type Open
Cage Type Fiber Glass Reinforced
Internal Clearance CN
Operating Temperature Range -40 to 250 ºF
Seal Material None
Dynamic Load Capacity 2740 lbf
Seal Type None
Static Load Capacity 740 lbf
Precision Rating Class 0
Maximum RPM 14000 rpm
Bearing Material High Carbon Chrome Steel
Cage Material Nylon
Finish/Coating Uncoated
Harmonization Code 8482.10.5060
Outer Ring Width 0.5906 in; 15.000 mm
Inner Ring Width 15.000 mm, 0.5906 in
Fillet Radius 1.000 mm, 0.0394 in
Series 12
Manufacturer UPC Number 4547359254822
Weight 0.291 lb




1. Design features and characteristics

The outer ring raceway of self-aligning ball bearings forms a spherical surface whose center is common to the bearing center. The inner ring of the bearing has two raceways.
The balls, cage, and inner ring of these bearings are capable of shifting in order to compensate for a certain degree of misalignment with the outer rings. As a result, the bearing is able to align itself and compensate for shaft / housing finishing unevenness, bearing fitting error, and other sources of misalignment as shown in Fig. 1.
Since axial load capacity is limited, self- aligning ball bearing are not suitable for applications with heavy axial loads.

It is recommended to use an adapter on a self-aligning ball bearing with a tapered bore inner diameter for ease of installation and disassembly. These bearings and adapters are often used on drive shaft applications.

 

2. Standard cage type


All bearing series are equipped with a pressed cage, except 2321S and 2322S, which are equipped with a machined cage.
Self-Aligning Ball Bearings
It is recommended to use an adapter on a self-aligning ball bearing with a tapered bore inner diameter for ease of installation and disassembly. These bearings and adapters are often used on drive shaft applications.

Table 1 Standard cage types of spherical ball bearings

 




 

3. Ball protrusion


Bearings with part numbers listed in Table 2 below have balls which protrude slightly from the bearing face as illustrated in Fig. 2. The total width dimensions are shown in Table 2.

4.  Allowable misalignment angle

The allowable misalignment angle can be determined by the following function. This degree of allowable misalignment may be limited by the design of mating components around the bearing.
Normal load ....................... 1/15

 

5.  Precautions for using self-aligning ball bearings

Self-aligning ball bearings are unable to support large axial loads and therefore axial loading shall be limited.
Please consider using self-aligning roller bearings when a large axial load is to be applied.