NSK Spherical Roller Bearings , Cylindrical Bore Bearings 23144CAME4 ,D=220

SKU: 23144CAME4


Shipping calculated at checkout

Available Now!

NSK Spherical Roller Bearings , Cylindrical Bore Bearings 23144CAME4 ,D=220


Boundary Dimensions
Basic Load Ratings
Limiting Speeds

Axial Load
d D B r
Cr C0r Thermal Reference Mechanical Grease Oil
Y2 Y3 Y0
23144CAME4 220 370 120 4 1960 2710 1300 1800 0 950 0.31 3.3 2.2 2.2 53



Various types of high load capacity spherical roller bearings are available. Types EA, C and CD have pressed-steel cages, and type CA has machined-brass cages. EA-type bearings listed here are classified as NSKHPSTM bearings, which offer particularly high load-carrying capacity, high limiting speeds, and superior performance under high-temperature operating conditions up to 200 °C.
An oil groove and holes are located in the outer ring to supply lubricant, and the bearing numbers are suffixed with E4.
To use bearings with oil grooves and holes, an oil groove should be located in the housing bore since depth for the groove in the bearing is limited. The dimensions of the oil groove and number of holes present are listed in Tables 1 and 2.
When bearings with a hole for a locking pin to prevent outer ring rotation are required, please contact NSK.

□Formulation of Bearing Designations

Spherical Roller Bearings


①Bearing Series     239, 230, 240, 231, 241, 222, 232, 213, 223 : Spherical roller bearings
②Bore number   Bore number indicates bore diameter. Bore number X 5 (mm)
③Internal design      EA, CA : High load capacity
④Cage  M : Machined-brass cage (for CA Design)
Omitted: Pressed-steel cage (for EA Design)
⑤⑥Ring design  K : Tapered bore of inner ring (taper 1 : 12)
K30 : Tapered bore of inner ring (taper 1 : 30)
E4 : Lubricating groove in outside surface and holes in outer ring
⑦Internal clearance     Omitted : CN clearance, C3 : Clearance greater than CN,
C4 : Clearance greater than C3, C5 : Clearance greater than C4
⑧Tolerance class      Omitted : ISO Normal, P6 : ISO Class 6, P5 : ISO Class 5, P4 : ISO Class 4
⑨Special specification   S11 ; Dimensional stabilizing treatment: working temperature under 200 °C
(omitted for EA design)
⑩NSKHPSTM     *H* : NSKHPSTM designation
Tolerance Class : ISO Normal

No reviews