NTN Deep Groove Ball Bearings 6003C3 , D=17
Radial/Deep Groove Ball Bearing - Round Bore, 17 mm ID, 35 mm OD, 10 mm Width, Open, CN Internal Clearance
|Bore Diameter||17.000 mm, 0.6693 in|
|Outside Diameter||35.000 mm, 1.3780 in|
|Overall Width||0.3937 in, 10.000 mm|
|Row Type & Fill Slot||Single Row Non-Fill Slot|
|Snap Ring Included||Without Snap Ring|
|Operating Temperature Range||-40 to 250 ºF|
|Dynamic Load Capacity||1690 lbf|
|Static Load Capacity||750 lbf|
|Precision Rating||Class 0|
|Bearing Material||High Carbon Chrome Steel|
|Inner Ring Width||0.3937 in, 10.000 mm|
|Outer Ring Width||0.3937 in; 10.000 mm|
|Maximum RPM (Grease)||20000 RPM|
|Maximum RPM (Oil)||24000 rpm|
|Fillet Radius||0.300 mm, 0.0118 in|
|Maximum RPM||24000 RPM|
1. Design features and characteristics
Deep groove ball bearings are very widely used. A deep groove is formed on the inner and outer ring of the bearing enabling the bearing to sustain radial and axial loads in either direction as well as the complex loads which result from the combination of these forces. Deep groove ball bearings are suitable for high speed applications. When two or more deep groove ball bearings are used in combination and mounted adjacent to each other a duplex set (D2) should be used. Duplex bearings (D2) utilize controlled tolerances to more evenly distribute the loading between the individual bearing rows which improves the overall performance of the assembly. In addition to unsealed and unlubricated “open” bearings, NTN provides deep groove ball bearings that are pre-lubricated with grease and enclosed by seals or shields. See section “11. Lubrication” for a list of some of the greases which can be used. Table 1 shows the construction and special characteristics of various sealed deep groove ball bearings.
|Types and codes N||Shielded type||Shielded type|
|Non-contact type ZZ||Non-contact type LLB||Contact type LLU||Low torque type LLH|
|Metal shield plate is affixed to the outside ring; the inner ring incorporates a V-groove and labyrinth clearance.||The outer ring incorporates synthetic rubber molded to a steel plate; seal edge is aligned with V-groove along inner ring surface with labyrinth clearance||The outer ring incorporates synthetic rubber molded to a steel plate; seal edge contacts V-groove along inner ring surface||Basic construction is the same as LLU type, but a specially designed lip on the edge of the seal prevents foreign matter penetration; low torque construction.|
|Dust proofing||Good||Better than ZZ-type||Excellent||Much better than LLB-type|
|Water proofing||Poor||Poor||Very good||Good|
|High speed capacity||Same as open type||Same as open type||Limited by contact seals||Much better than LLU-type|
|Allowable temp. range||Depends on lubricant||−25 to 120°C||−25 to 110°C||−25 to 120°C|
We have a 30-day return policy. Returns are limited to items purchased within 30 days and are subject to a 25% restocking fee.
Items must be unworn, unused, with tags and in original packaging to be eligible for return. A receipt or proof of purchase is also required.
To initiate a return, please contact email@example.com If your item is eligible for a return, you will be credited 75% of the original purchase price, not including any shipping costs. Please contact your sales professional to request an RMA (Return Materials Request) as only returns bearing an RMA will be received. All items must be in new saleable condition in the original packaging. Credits will be issued once the item has been received and inspected.
If you have any questions regarding returns or exchanges, please contact firstname.lastname@example.org
damage and problems
Please inspect your order upon receipt and if the item is defective or damaged, or if you have received the wrong item, please contact us immediately so that we can evaluate the problem and deal with it properly.
Unfortunately we do not accept returns on non-policy items, discount items or gift cards.
The fastest way to get the item you want is to return the item you have and purchase a new item separately once the return has been accepted.
After we receive and inspect your return, we will notify you and let you know if a refund has been approved. If approved, your original payment method will be automatically refunded. Remember, it may take a while for your bank or credit card company to process and post your refund.